Straight Titanium Nitride Clicq™-Pression Transfer Abutment MegaGen® AnyRidge™ RP Compatible
$28.00
- Buy 10 for $25 save 11%
| SKU | Stock | Collar Height | Cone Length | Quantity | ||
|---|---|---|---|---|---|---|
| TAP-AR-RP15S | Out of stock | 1.5mm | 4mm | |||
| TAP-AR-RP30S | Out of stock | 3mm | 4mm | |||
| TAP-AR-RP45S | Out of stock | 4.5mm | 4mm | |||
| TAP-AR-RP15M | Out of stock | 1.5mm | 6mm | |||
| TAP-AR-RP30M | Out of stock | 3mm | 6mm | |||
| TAP-AR-RP45M | Out of stock | 4.5mm | 6mm | |||
| TAP-AR-RP15L | In stock | 1.5mm | 8mm |
-
+
|
||
| TAP-AR-RP30L | In stock | 3mm | 8mm |
-
+
|
||
| TAP-AR-RP45L | In stock | 4.5mm | 8mm |
-
+
|
Straight TiN Transfer for MegaGen® AnyRidge™ RP
- AnyRidge Connection System
- Collar Height: 1.5mm, 3mm, 4.5mm
- Abutment Diameter Ø 4.8mm
- Cone Length: 4mm, 6mm, 8mm
- Fits All Platforms: 3.5mm / 4.0mm / 4.5mm / 5.0mm / 5.5mm / 6.0mm / 6.5mm / 7.0mm / 7.5mm / 8.0mm
- Compatible with: MegaGen® AnyRidge™
- Fixation Screw is Included!
- Snap-On plastic transfer is included
- PEEK healing cap can be purchased separately
- One-Piece Analog can be purchased separately
- Castable waxing sleeves can be purchased separately
- Material: Titanium Ti-6AL-4V-ELI
Advantages:
– Enable to take a more accurate impression
– Allows you to take a full mouth impression
– Can be used as a final abutment
– Titanium Nitride (TiN) coating finish
– Cost effective – can be reused several times
Information about the material: Titanium
To learn more about Implant Impression Copings go to our Blog.
Be the first to review “Straight Titanium Nitride Clicq™-Pression Transfer Abutment MegaGen® AnyRidge™ RP Compatible”
You must be logged in to post a review.
| Collar Height | 1.5mm, 3mm, 4.5mm |
|---|---|
| Compatible With | |
| Connection | |
| Cone Length | 4mm, 6mm, 8mm |
Product Enquiry
Product SKU: TAP-AR-RP-XX
Reviews
There are no reviews yet.