Straight Titanium Nitride Clicq™-Pression Transfer / Abutment for Osstem® TS, Hiossen® RP
$20.00
- Buy 5 for $18 save 10%
- Buy 10 for $16 save 20%
| SKU | Stock | Collar Height | Cone Length | Quantity | ||
|---|---|---|---|---|---|---|
| TAP-TS-RP-15S | In stock | 1.5mm | 4mm |
-
+
|
||
| TAP-TS-RP-30S | In stock | 3mm | 4mm |
-
+
|
||
| TAP-TS-RP-45S | In stock | 4.5mm | 4mm |
-
+
|
||
| TAP-TS-RP-15M | In stock | 1.5mm | 6mm |
-
+
|
||
| TAP-TS-RP-30M | In stock | 3mm | 6mm |
-
+
|
||
| TAP-TS-RP-45M | In stock | 4.5mm | 6mm |
-
+
|
||
| TAP-TS-RP-15L | In stock | 1.5mm | 8mm |
-
+
|
||
| TAP-TS-RP-30L | In stock | 3mm | 8mm |
-
+
|
||
| TAP-TS-RP-45L | In stock | 4.5mm | 8mm |
-
+
|
TiN Clicq-Pression™ Transfer / Abutment for Osstem® TS, Hiossen®
- Conical Connection System
- Collar Height: 1.5mm, 3mm, 4.5mm
- Abutment Diameter Ø 4.8mm
- Cone Length: 4mm, 6mm, 8mm
- Regular Platform (RP) 4.0mm / 4.5mm
- Compatible with: Osstem® TS, Hiossen®
- Fixation Screw is Included!
- Snap-On plastic transfer is included
- PEEK healing cap can be purchased separately
- One-Piece Analog can be purchased separately
- Castable waxing sleeves can be purchased separately
- Material: Titanium Ti-6AL-4V-ELI Grade 5
- Advantages:
– Made from Titanium Ti-6AL-4V-ELI Grade 5
– Enable to take a more accurate impression
– Can be used as a final abutment
– Titanium Nitride coating finish
– Cost effective – can be reused several times
Information about the material: Titanium
To learn more about Implant Impression Copings go to our Blog.
Reviews
There are no reviews yet.
| Collar Height | 1.5mm, 3mm, 4.5mm |
|---|---|
| Compatible With | |
| Connection | |
| Cone Length | 4mm, 6mm, 8mm |
Product Enquiry
Product SKU: TAP-TS-RP
Be the first to review “Straight Titanium Nitride Clicq™-Pression Transfer / Abutment for Osstem® TS, Hiossen® RP”
You must be logged in to post a review.